DC315 Thermal & Ignition Barrier

DC315 Thermal & Ignition Barrier is a coating used to protect spray polyurethane foam insulation against fire. It is a spray-on material that acts as a barrier between the foam insulation and the surrounding area, preventing the spread of fire in case of an accidental ignition. DC315 is designed to meet the requirements of the International Building Code and is tested and approved by UL and Intertek.

DC315 Thermal & Ignition Barrier works by creating a protective layer on top of the spray polyurethane foam insulation. The coating is specifically formulated to prevent the foam insulation from igniting and to slow down the spread of fire in case of an accidental ignition. In the event of a fire, the DC315 coating will expand and form a thick char layer that insulates the foam insulation from the heat and flame, preventing it from catching fire.

DC315 Thermal & Ignition Barrier is used in commercial, industrial, and residential buildings as a protective coating for spray polyurethane foam insulation. It is applied to the foam insulation in areas where the building code requires a thermal or ignition barrier. These areas typically include attics, crawl spaces, and other concealed spaces where the foam insulation is not protected by other materials.

The benefits of using DC315 Thermal & Ignition Barrier are numerous. First and foremost, it provides a high level of fire protection for spray polyurethane foam insulation, which is a highly flammable material. Additionally, DC315 is easy to apply and can be sprayed on using standard equipment. It is also a cost-effective solution compared to other fire protection methods. Finally, DC315 is environmentally friendly and does not contain any harmful chemicals, making it safe for use in any building environment.

Yes, DC315 Thermal & Ignition Barrier is relatively easy to apply. It can be sprayed on using standard equipment, such as airless sprayers, and does not require any specialized tools or equipment. However, it is important to follow the manufacturer’s instructions for proper application and to ensure that the coating is applied evenly and at the correct thickness.

DC315 Thermal & Ignition Barrier must be applied according to specific application requirements to ensure optimal performance. These requirements include surface preparation, application thickness, and curing time. The surface must be clean and dry, and any contaminants or debris must be removed before application. The coating must be applied at the correct thickness to provide adequate fire protection, which is typically between 12-20 mils (1 mil = 0.001 inch). Finally, the coating must be allowed to cure for a minimum of 24 hours before it can be exposed to any moisture or other materials.

DC315 Thermal & Ignition Barrier is a safe product to use when applied according to the manufacturer’s instructions. However, it is important to follow proper safety procedures when handling the product. The coating should be applied in a well-ventilated area, and appropriate personal protective equipment (PPE) should be worn, including gloves, safety glasses, and a respirator. It is also important to avoid skin contact and to wash any exposed skin with soap and water immediately. Finally, the product should be stored in a cool, dry place, away from direct sunlight or sources of heat.